
High-Alumina Brick LZ-55
High-alumina brick (Al₂O₃≥55%) for blast furnaces, hot blast stoves and EAF roofs.
All refractory bricks, filter by category, industry and customization
29 products

High-alumina brick (Al₂O₃≥55%) for blast furnaces, hot blast stoves and EAF roofs.

High-alumina brick (Al₂O₃≥65%) for critical high-temperature furnace zones.

Low-creep high-alumina brick for hot blast stoves with minimal high-temperature creep.

Phosphate-bonded high-alumina brick, usable without high-temperature firing, for cement kiln transition zones.

ZrO₂-containing spalling-resistant high-alumina brick for cement kilns.

Micro-expanding high-alumina brick that tightens joints at high temperature for sealed linings.

General-purpose fireclay brick with good thermal shock resistance at economical cost.

Low-porosity fireclay brick (porosity≤15%) for glass furnace regenerators.

Silica brick (SiO₂≥94%) with high RUL for coke ovens and glass furnace crowns.

Basic magnesia brick from fused/sintered magnesia for non-ferrous smelting furnaces.

MgO-C brick with outstanding slag and thermal shock resistance for converter and EAF linings.

Chrome-free magnesia-spinel brick for cement kiln burning zones, environmental and erosion resistant.

Magnesia-chrome brick for high-temperature zones of non-ferrous furnaces.

MgO-CaO brick with strong steel refining capability for AOD/VOD furnaces.

High-purity corundum brick for gasifiers and high-temperature reactors.

Chrome-corundum brick resistant to molten glass attack for tank walls and doghouses.

Mullite brick with thermal shock and creep resistance for glass and ceramic kilns.
Silicon-mullite brick with wear resistance and low conductivity for coolers and transition zones.

Andalusite brick with volume stability and thermal shock resistance for stoves and torpedo ladles.

SiC brick with high thermal conductivity and wear resistance for incinerators and aluminum cells.

Lightweight high-alumina insulating brick rated at 1500℃ for hot-face insulation.

Economical lightweight fireclay insulating brick for boiler and duct insulation.

Lightweight silica brick with high RUL for glass furnace crown insulation.

Fused-cast AZS block with outstanding molten-glass resistance for tank walls and pavements.

Zirconia brick rated above 2300℃ for ultra-high temperature critical zones.

Checker brick for stove regenerators with high heat-exchange efficiency and custom hole patterns.

High-alumina/corundum refractory balls for stove and heater heat storage in full sizes.

Custom special-shaped bricks per drawing in alumina, fireclay, mullite grades with high precision.

Drawing-based refractory precast blocks for fast installation in complex furnace geometries.
客服微信 · 17513376789